Add the part no. for Switzerland type power cord
Revise the description for 98-0250184-00LF (Main
board ass’y with internal print server kit)
Revise the black mark sensor assembly part no.
Revise the print head harness part no. from
70-52B2604-11LF to 72-0250008-00LF
1. Revise the hinge holder part no.
2. Revise the TPH plastic bracket part no.
Remove the parts list section
Add connector JP6 description
Modify section 3.13 (Recommended SD card
specification)
*Add TTP-247/TTP-345 printer
*Add the section 1.2.2
*Update the section 7
Modify section 2.1 and 3.4