2-2 Model 3772/3771 Condensation Particle Counter
Table 2-2
Model 3771 CPC Packing List
Model 3771 CPC and Operation Manual
Aerosol Instrument Manager
®
Software
RS-232 Cable (A-pin M/F, 12 ft)
Water Removal Filter Inline, 25 micron
1
16" barb
Butanol Fill/Drain Filter Inline, 73 micron
1
8" barb
Saturator Base O-Ring FVMQ 1-010
Saturator Base O-Ring FVMQ 1-030
Saturator Base O-Ring EPDM 1-027
Certificate of Conformance
Note: Some items in the lists above and those for future maintenance are
available for purchase as kits from TSI. A complete list of
replacement part kits is included in the maintenance section in
Chapter 8.
Unpac k i n g
The Model 3772/3771 CPC comes fully assembled with protective
coverings on the inlet sample port, exit ports, and analog connectors. The
CPC comes packaged with the accessory kit. Use the packing list
(Table 2-1 or Table 2-2) to make certain that there are no missing
components.
The CPC box contains special foam cutouts designed to protect the
instrument during shipment. Save the original packaging materials for
future use should you need to ship the instrument or return the instrument
to TSI for service. Also keep the protective coverings for ports for shipping.
To avoid contaminating the instrument or the environment the CPC is
monitoring, do not remove the protective covers until you are ready to
install the instrument.
If anything is missing or appears to be damaged, contact your TSI
representative or contact TSI Customer Service at 1-800-874-2811 (USA)
or (651) 490-2811. Chapter 8, “Maintenance and Service,” gives
instructions for returning the CPC to TSI Incorporated.
To Next Page
Loading...
