7-2 Model 3772/3771 Condensation Particle Counter
Windows
®
firewall is enabled (on by default in service pack 2),
the device discovery will not find any CPCs. Once the IP
address is known, you can access the CPC from another
subnet.
3. Select the device and choose Configure network settings.
Figure 7-1
Digi Device Discovery Screen
4. Talk with your network administrator to verify the correct network
settings this device should operate at. If needed, the MAC address can
be located on the back of the instrument or in this pop-up window. Fill
in the appropriate information and click Save.
®
Windows is a registered trademark of Microsoft Corporation.
To Next Page
Loading...
