Safety ix
Caution or Warning Symbols
The following symbols may accompany cautions and warnings to indicate
the nature and consequences of hazards:
Warns you that uninsulated voltage within the instrument may
have sufficient magnitude to cause electric shock. Therefore,
it is dangerous to make any contact with any part inside the
instrument.
Warns you that the instrument contains a laser and that
important information about its safe operation and
maintenance is included. Therefore, you should read the
manual carefully to avoid any exposure to hazardous laser
radiation.
Warns you that the instrument is susceptible to electro-static
dissipation (ESD) and ESD protection procedures should be
followed to avoid damage.
Indicates the connector is connected to earth ground and
cabinet ground.
Labels
Advisory labels and identification labels are attached to the outside of the
CPC housing and to the optics on the inside of the instrument. Labels for
the Model 3772/3771 CPC are described below:
1. Serial Number label –
displayed on the back panel
2. Laser Radiation label –
located internally on the optics
housing
3. Electrical shock caution
label – displayed on back
panel
4. Laser device compliance
label – displayed on back
panel
To Next Page
Loading...
