Operation and Service Manual 27
Time Constant is the display averaging period. The display will
update every second; however, the displayed reading will be the
average over the time constant period. For example, if the time
constant is 5 seconds, the display will update every second, but
the displayed reading will be the average of the last 5 seconds.
Unit Setting s
The Unit Settings page is used to
configure the desired unit of
measure for each measurement.
Date a nd Time
The Date and Time page is used to
configure the desired formats for
date and time and to set device
date and time.
To Next Page
Loading...
Need help?
General
