Once all the details have been entered for the fob, press the Save key.
Figure A.23
There is a section in the rear of the manual, where the fob ID, Description and Group can be recorded.
Deleting a fob
If a fob is no longer needed it is possible to delete this from the system. If the SCP shows ‘Press * to
unlock’, press the * key followed by the Menu key or select Menu if the SCP is already unlocked.
Figure A.24
Select ‘Access Ctl’ from the menu (Figure A.25)
Figure A.25
Now select Delete Device (Figure A.26).
Figure A.26
To Next Page
Loading...
