TurboChef HIGH H BATCH 2

T
o access the OPTIONS menu:
1.
Ensure the oven is cooling down or off.
2. Press and hold either the top left or top right
soft key for 5 seconds.
Enabling/Disabling the E
dit M
enu
Reference Figure 13. Enabling the EDIT menu
allows operators to modify the cook cavity
temperatur
e, group/item names, and recipe
settings. D
isabling the
EDIT menu prevents
operators from accessing these options. By
default, the EDIT menu is enabled.
T
o enable/disable the EDIT menu:
1.
From the OPTIONS menu, press the “Edit Menu”
soft key (top left) to turn the EDIT menu on/off.
2.
P
ress the BACK/STOP key to exit.
Er
asing the Recipe Menu
R
eference Figure 14. Erasing the RECIPE MENU will
permanently delete curr
ently-stored recipes and
recipe settings, and is generally not recommended.
T
o erase the
RECIPE MENU:
1. From the OPTIONS menu, press the “Erase Menu”
soft key (middle left).
2. Press the ENTER key to confirm or the
BACK/STOP key to cancel.
3.
Press the BACK/STOP key to exit.
NO
TE: Erasing the recipe menu is not required
when uploading new settings from a smart card
(page 20).
FIGURE 13: Enabling/Disabling the Edit Menu
EDIT MENU ON
ERASE MENU
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
DEMONSTRATE OFF
S
tep: 2
T
o access the
OPTIONS menu,
pr
ess and hold either key for 5 seconds.
H
er
e the EDIT menu is turned on.
Step: 1
FIGURE 14: Erasing the Menu
EDIT MENU ON
ERASE MENU
ERASE MENU?
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
PRESS “ENTER”
DEMONSTRATE OFF
S
tep: 3
After “Erase Menu” is selected, a
confirmation message appears.
S
tep: 1
S
tep: 2
T
o access the
OPTIONS menu,
pr
ess and hold either key for 5 seconds.
15
OPERATING THE OVEN