TurboChef HIGH H BATCH 2 User Manual

Enabling/Disabling Done Screen
R
eference Figure 17. Enabling the DONE screen
allo
ws the operator to:
o
S
av
e an adjusted cook time
o
Cook an item longer after it reaches the end
of its cook cy
cle
D
isabling it helps ensure all originally-programmed
cook times r
emain unalter
ed. By default, the DONE
scr
een is enabled.
T
o enable/disable the
DONE screen:
1. From the OPTIONS menu, press the “Done
Scr
een” soft key (middle right) to turn the DONE
screen on or off.
2. Press the BACK/STOP key to exit.
Demonstration Mode
When enabled, demonstration mode will pr
event
the o
v
en from heating. This mode should remain
off unless otherwise instructed by TurboChef.
EDIT MENU ON
ERASE MENU
WRITE CARD OFF
TIME SCREEN ON
OVEN OPTIONS
DONE SCREEN ON
DEMONSTRATE OFF
FIGURE 17: Enabling/Disabling the Done Screen
S
tep: 2
Here the DONE screen is turned on.
Step: 1
T
o access the OPTIONS menu,
pr
ess and hold either key for 5 seconds.
17
OPERATING THE OVEN

TurboChef HIGH H BATCH 2 Specifications

General

Brand	TurboChef
Model	HIGH H BATCH 2
Category	Oven
Language	English