Error message Cause Remedy
Structural
err.
Error in the le list of the
data medium, data access is
uncertain.
Format data medium.
System Error
e.g. FPGA defective, invalid
setup, voltage error
Switch the printer off and then
on. Please note error details
shown on the display.
If error recurs call support.
Unknown card
Data medium not formatted. Format data medium.
Type of data medium not
supported.
Use different type of data
medium.
USB error
e.g. Too much current, no
reaction, unknown device
Do not use the USB device.
Write error
Hardware error Repeat the write process,
reformat card.
Write
protected
Data medium write protection
is activated.
Deactivate the write protection.
Table 5 Error Messages and Fault Correction
8 Fault Correction
To Next Page
Loading...
