1.3 Intended Use
• The printer is manufactured in accordance with the current technological
status and recognized safety rules. However, danger to the life and limb
of the user or third parties and/or damage to the printer and other tangible
assets can arise during use.
• The printer may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in this operating manual.
• The printer is intended exclusively for printing suitable TE Connectivity (TE)
approved media. Any other use going beyond this shall be regarded as
improper use. The manufacturer/supplier shall not be liable for damage
resulting from unauthorized use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with this
manual, including the manufacturer‘s maintenance recommendations and
specications.
1.4 Disclaimer
While TE has made every reasonable effort to ensure the accuracy of the
information in this document, TE does not guarantee that it is error-free,
nor does TE make any other representation, warranty or guarantee that the
information is accurate, correct, reliable or current. TE reserves the right to
make any adjustments to the information contained herein at any time without
notice. TE expressly disclaims all implied warranties regarding the infor-
mation contained herein, including, but not limited to, any implied warranties
of merchantability or tness for a particular purpose. The dimensions in this
document are for reference purposes only and are subject to change without
notice. Specications are subject to change without notice. Consult TE for the
latest dimensions and design specications.
Only the English Language version of this document is legally binding
i
Notice!
The complete documentation is included on the enclosed DVD
found in the printer box.
1.5 Safety Instructions
• The printer is congured for voltages of 100 to 240 V AC. The printer must
be connected to a grounded socket.
• Only connect the printer to other devices which have a protective low
voltage.
• The printer may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
• Do not use the printer in an explosive atmosphere.
• Do not use the printer close to high-voltage power lines.
1 Introduction
To Next Page
Loading...
