Tyco Electronics T200 IDENT - Unpacking and Setting-up the Printer

8
9
9
13
15
12
10 11
1617
14
10 Media sensor
11 Printhead retainer with
printhead
12 Media guides
13 Knob for adjusting the guides
14 Knob for adjusting the media
sensor
15 Lever for locking the
printhead
16 Tear-off plate
17 Print roller
Fig. 3 Print Mechanics
2.2 Unpacking and Setting-up the Printer
 Lift the printer out of the box and set it up on a level surface.
 Check printer for damage which may have occurred during transport.
 Check delivery for completeness.
Contents of Delivery:
• T200 Ident Printer
• Power Cable EU
• Power Cable UK
• Power Cable US
• Cardboard Core
• Operator's Manual
• DVD with demo versions of Wintotal and Printeasy, Windows driver and
documentation
• USB Cable
i
Notice!
Please keep the original packaging in case the printer must be
returned.
i
Notice!
When transporting the printer remove the transfer ribbon and media.
!
Attention!
The printer and media can be damaged by moisture and excessive
dust contamination.
 Set up the Printer in a dry location protected from splashed
liquids, and sources of excessive dust.
2 Installation