UFactory 850 - Page 20

20
Operator Safety
In the operation of the robotic arm system, we must ensure the safety of
the operators first, with the general precautions listed in the table below.
Please take appropriate measures to ensure the safety of operators.
1. Each operator who uses the robotic arm system
should read the product user manual carefully.
Users should fully understand the standardized
operating procedures with the robotic arm, and
the solution to the robotic arm running error.
2. When the device is running, even if the robotic arm
seems to stop, the robotic arm may be waiting for
the signal and in the upcoming action status. Even
in such a state, it should be considered as the
robotic arm is in action.
3. A line should be drawn to mark the range of
motion of the robotic arm to let the operator
acknowledge the robotic arm, including its end
tools (such as gripper and suction cup, etc)
operating range.
4. Check the robotic arm regularly to prevent
loosening of the bolts that may cause undesirable
consequences.
5. Be careful when the robotic arm is running too
fast.
6. Be careful about dropping items that can be