3. Make sure that there is no obstacle in the robotic
arm’s working space.
4. The Control Box must be placed outside the
working range of the robotic arm to ensure the
emergency stop button can be pressed once an
emergency occurs.
5. If the robotic arm is in operation and needs an
emergency stop, make sure the restart/reset
motions will not collide with any obstacle.
6. Do not modify the robotic arm (or Control Box).
Any modification may lead to unpredictable
danger to the integrators. The authorized
restructuring needs to be in accordance with the
latest version of all relevant service manuals. If
the robotic arm is modified or altered in any
way, UFACTORY (Shenzhen) Technology Co., Ltd.
disclaims all liability.
7. Users need to check the collision protection and
water-proof measures before any
transportation.
When the 850 cooperates with other machinery, a
comprehensive safety assessment of the entire
collaboration system should be performed. It is
recommended that any equipment that may cause
mechanical damage to 850 be placed outside the
working range during application planning.
To Next Page
Loading...
