____________________________________________________________________________________________
Page 2/63 UltraGauge™ EM User Manual www.ultra-gauge.com
WARNINGS
Information in this document is subject to change without notice. Ultra-Gauge.com reserves the right to change or improve its products
and to make changes in the content without obligation to notify any person or organization of such changes, additions or improvements.
Always visit Ultra-Gauge.com for the latest updates concerning the installation, use and operation of this product.
Failure to avoid the following potentially hazardous situations can result in an accident or
collision resulting in death or serious injury
INSTALLATION WARNINGS
When installing UltraGauge in your vehicle, place UltraGauge so that it does not obstruct the driver’s view of the road or ability
to operate the vehicle.
Extreme care must be taken when routing the OBD II cable. Avoid routing and installing in such a fashion that the cable can
interfere with any of the foot controls, steering wheel, or other vehicle controls, or represent an entry or exit hazard to the driver.
Always secure excess or loose cable so that feet and hands do not become entangled.
The windshield mount or Velcro mount may not stay attached under all conditions. Do not mount UltraGauge where it will
become a distraction or hazard should it become detached.
Do not mount UltraGauge in an area that may interfere with the deployment of airbags. Consult your vehicles owner’s manual.
UltraGauge in rare circumstances may impair select vehicle systems. See the Forced Protocol section for more information and
resolution.
Tightening the windshield mount locking ring will result in increased force necessary to adjust the position of UltraGauge and if
over tightened may result in damage. The ring should be adjusted so that the ball swivel offers a very slight resistance to
movement.
OPERATION WARNINGS
Never attempt to operate UltraGauge controls while the vehicle is moving. Not only is this extremely hazardous, UltraGauge
stops performing mileage, distance and other calculations while the menu system is active.
Never become distracted by UltraGauge while driving.
Liability
The use of UltraGauge is at your own risk. Ultra-Gauge.com shall in no event be liable for any damages, whether direct or indirect,
special or general, consequential or incidental, arising from any loss claimed as a result of the use of UltraGauge.
Battery Warning
This product contains no batteries
Fuse Warning
This product is equipped with a fuse. The fuse is integrated in the male OBD-II connector and cannot be accessed or replaced.
This fuse provides protection against potential short-circuit conditions within UltraGauge and short-circuits introduced into the
cable.
!
WARNING
!
To Next Page
Loading...
