____________________________________________________________________________________________
Page 54/63 UltraGauge™ EM User Manual www.ultra-gauge.com
Trouble Code Alarm
MENU Alarms .. Trouble Code Alarm
Enabling this alarm will cause UltraGauge to alarm if trouble codes are posted by the Vehicles ECM. Most likely the vehicles
Check Engine Light on the dash will also light.
To view the posted trouble codes select MENU Trouble Codes.. Engine Trouble Codes. UltraGauge checks for trouble
codes every other time it completes checking all other gauge alarms.
Note: Beginning with the UltraGauge Plus, when a trouble code alarm occurs, the trouble code that triggered the alarm will be
displayed during the alarm event. If more than one code is posted, only the first code is displayed on the alarm screen. If there is
more than one code posted, it will be necessary to go to the Trouble code Menu to view all codes
Pending TC Alarm
MENU Alarms .. Pending TC Alarm
Enabling this alarm will cause UltraGauge to alarm if pending trouble codes are posted by the Vehicles ECM. The Vehicle will not
light the Check Engine Light on the dash when pending codes are posted.
To view the posted pending trouble codes select MENU Trouble Codes.. Pending Codes. UltraGauge checks for pending
trouble codes every other time it completes checking all other gauge alarms.
Note: Beginning with the UltraGauge Plus, when a trouble code alarm occurs, the trouble code that triggered the alarm will be
displayed during the alarm event. If more than one code is posted, only the first code is displayed on the alarm screen. If there is
more than one code posted, it will be necessary to go to the Trouble code Menu to view all codes
To Next Page
Loading...
