UltraGauge EM plus - Box Contents; Ultragauge EM Plus Features

____________________________________________________________________________________________
Page 9/63 UltraGauge™ EM User Manual www.ultra-gauge.com
Box Contents
 UltraGauge EM v1.4 & OBDII Cable
 UltraGauge protective plastic sleeve
 Optional: Mount(s)
 Optional: Hook & Loop Mount
 Mounting bracket – already attached to UltraGauge
 Warning insert with link to Website.
UltraGauge™ EM Plus Features
 Supports most 1996 and newer OBDII compliant vehicles***
 Up to 88 selectable Imperial Gauges
*
 Up to 51 additional Metric Gauges*
 Emissions Readiness Status
 Performance Measurements
 UG Battery Voltage
 Real time and long term mileage gauges
 Distance-To-Empty & Time-to-Empty Gauges
 Horsepower and torque gauges
 7 pages of gauges for as many as 56 quickly accessible gauges
 Each gauge page can be individually configured to display 4, 6, or 8 gauges.
 Each gauge page can be enabled or disabled
 Auto-Page advance, cycles through gauge pages
 Each gauge can be assigned to any page and to multiple pages
 The rate at which gauges are updated is configurable
 Configurable low and high alarms for every gauge
 Audible and Visual Alarms
 Alarms may be individually suspended.
 Displays both current and pending trouble codes
 Clear Check Engine Light and Trouble Codes
 Current and pending Trouble Code Alarms
 Automatic fuel fill-up detection
**
 Oil change and Service Gauges
 Trip and short trip Gauges
 Health indicator
 Internal Temperature sensor that can be monitored and alarmed
 Closed and open loop indicator.
 Large LCD Display
 Display Brightness adjusts automatically to ambient light
 Lightweight easy to route OBD II cable
 Compact and easily mounted with Velcro or windshield mount
 Low power
 Retains configuration and accumulated data across power cycles
 Automatically detects and turns off display when vehicle is off****
 Comprehensive menu system
*
Actual number of gauges supported is vehicle dependent
** Auto Fill-up detection is not available on all vehicles.
*** Some vehicles may not be OBD-II compliant. Compliance is printed on the emission decal typically located in the engine
compartment. See example compliance decals at the end of this document.