UltraGauge EM plus - Fuel Economy and Distance Tracking

____________________________________________________________________________________________
Page 27/63 UltraGauge™ EM User Manual www.ultra-gauge.com
Instantaneous
MPG,
KPL,
L/100k
Gauge name Range Units Abbreviation
Instantaneous MPG 0 to 999.9 Miles/gallon Inst MPG
Instantaneous KPL 0 to 999.9 Kilometers/Liter Inst KPL
Instantaneous L/100k 0 to 999.9 Liters /100 Kilometers Inst L/K
Instantaneous Fuel Economy
Average MPG
Average KPL
Average L/100k
Gauge name Range Units Abbreviation
Average MPG - general 0 to 999.9 Miles/gallon Ave MPG
Average KPL - general 0 to 999.9 Kilometers/Liter Ave KPL
Average L/100k -general 0 to 999.9 Liters /100 Kilometers Ave L/K
Average Fuel Economy. Average fuel economy is calculated based upon the actual fuel used
and the distance traveled. Part of the Group of “General” gauges…. as opposed to “Trip”
Gauges. This gauge is reset by selecting:
MENU
 Gauge/Page Menu ..  Zero Ave MPG, G/H
Average MPH
Average KPH
Gauge name Range Units Abbreviation
Average MPH - general 0 to 999.9 Miles/hour Ave MPH
Average KPH - general 0 to 999.9 Kilometers/hour Ave KPH
Average speed. Part of the Group of “General” gauges…. as opposed to “Trip Gauges.
Reset by selection MENU
 Gauge/Page Menu ..  Zero Ave Speed
Distance
Gauge name Range Units Abbreviation
Distance - general 0-999,999
Miles
Kilometers
Gen dst
Distance - trip 0-99,999 Trp dst
Distance - Oil 0-99,999 Oil dst
Distance - Service 0-99,999 Srv dst
All four distances gauges can independently measure miles traveled and can be used for any
purpose desired
Oil
Intended to track the miles since the last oil change. With each oil change, reset this gauge:
MENU
 Gauge/Page Menu ..  Zero Oil Distance. By Default the Oil Distance alarm is
enabled and set to 3000 miles.
Service
Intended to track service intervals such as 15K, 30K or 60K mile service intervals.
Reset: MENU
 Gauge/Page Menu ..  Zero Service Dist. Use in combination with
Alarms for maximum effectiveness. By default this alarm is disabled.
Trip
Trip Distance is part of the group of five trip gauges. All trip gauges are reset as a group.
MENU
 Gauge/Page Menu ..  Zero All Trip
General
Primarily used to calculate Average Miles per Gallon. Normally an internal value, but made
available to aid in understanding the Average MPG Calculation. Average MPG is found by
dividing General Distance by Gallons used, where Gallons is “Gallons – general”.
This gauge is reset by resetting the Average MPG:
MENU
 Gauge/Page Menu ..  Zero Ave MPG, G/H