UltraGauge EM plus - Ultragauge Setup; Version; Save and Restart; Restore ALL Defaults

____________________________________________________________________________________________
Page 44/63 UltraGauge™ EM User Manual www.ultra-gauge.com
UltraGauge Setup..
Version
MENU  UltraGauge Setup ..  Version
Displays the following information:
 Version number
 Version date
 Number of Gauges found during the discovery process
 Fuel level Sensor supported by vehicle; Yes or No.
 Sensor used to calculate fuel usage and MPG; MAP, MAF, None, MAP Forced, MAF Forced. See Force MPG sensor
for meaning of “Forced”
 Protocol found during the scanning process
UltraGauge comes with free minor updates for one year. However, it is necessary to ship your unit in for the update, as it is
not field updateable. Update information, if any, will be posted on the support page of the Ultra-Gauge.com website. All
transportation costs are the responsibility of the user.
Save and Restart
MENU  UltraGauge Setup ..  Save and Restart
Saves any current accumulated MPG, MPH, Time and Distance data and then restarts. Normally this should not be used.
However if it is suspected that UltraGauge is not performing correctly, this may correct potential issues.
Restore ALL Defaults
MENU  UltraGauge Setup ..  Restore ALL defaults
Restores all internal and configurable settings back to the factory defaults. Restoring all defaults should be used with care as it
restores all configurations such as Calibration, Gauge selection, Alarms settings, display settings as well as all accumulated
MPG, MPH, Time, and Distance. This function is a global restore. There is generally individual restores or resets for various
functions which should always be used first to correct suspected issues. This can be considered the global “Reset” of
UltraGauge.
Factory Test
MENU  UltraGauge Setup ..  Factory Test
Used to test UltraGauge at the factory and should normally not be used. It is also used as part of the reward process. The
factory test will print a series of two digit numbers to the screen. The numbers have no practical meaning and are used by
factory personnel to establish the validity of the reward claim. Should the numbers displayed fill and scroll off the screen,
power cycle UltraGauge and when prompted select “Safe” mode and then re-run factory test.