32 MAKING AND ANSWERING CALLS Customer Service: 888-269-7477
Adjusting the Tone Control
You can adjust the Tone of the handset sound to a frequency range that is
better to hear. Use the Tone setting to emphasize HIGH, MEDIUM, or LOW
frequency sound ranges. You can even customize the sound frequency to
match your own audiogram. The setting will remain in e ect until you
change it again.
You can adjust the Tone setting before, during, or after a call.
To adjust the Tone setting:
1. On the display screen, touch
(Settings).
2. Touch
(Sounds).
3. Touch
(Tone).
4.
The display shows what the current setting is: LOW, MED, HIGH, or CUSTOM.
5. Touch the Tone setting you wish to use.
To test how the Tone setting will sound, lift the handset and press
on the
display screen. You will hear a recording of rst a man’s and then a woman’s
voice, letting you check if the setting makes it easier to hear. Experiment
with the di erent Tone settings to nd the range that works best.
During a call: touch
(Tone) repeatedly to toggle between settings to
the level that you hear best.
accept
cancel
lift the handset and
press play button to test the tone setting
Tone Control
Touch low, med, or high to select desired tone
low medium high
custom
This tone setting will help you
hear medium-pitched voices
To Next Page
Loading...
Need help?
General
