96 SETTINGS Customer Service: 888-269-7477
Advanced Settings
Dialing Pre x
Some offi ce environments require you to dial a number in order to get an
outside line. For example, you may need to dial a 9 or another number
sequence before you can place a call. CapTel 2400iBT lets you add a dialing
pre x, then will dial it for you automatically for every call placed from your
Contact list, or when using the Speed Dial, Call History, or Answering
Machine history. If you dial the phone number directly, you will need to
enter the Dialing Pre x at the time you dial. The default setting is no
dialing pre x.
Settings → General Settings → Advanced Settings
→
1 2 3
4 5 6
7 8
0
9
Dialing Pre x.
Dynamic or Static IP
Using a Dynamic IP address (DHCP) is recommended to avoid IP con icts.
Some networks do not allow DHCP. In those cases, a Static IP address may
be used. The default setting is Dynamic IP.
Settings → General Settings → Advanced Settings
→
Dynamic or Static IP
Review Captions on Hang Up
You can set your CapTel phone to automatically go to conversation review
mode after you hang up. This allows you to review the previous
conversation(s) immediately after every call without using the Menu
system. The default setting is o .
Settings → General Settings → Advanced Settings
→
Review Captions on Hang Up
To Next Page
Loading...
