Figure 32 shows the “Reflashing” is successful.
figure 32
4.5 Scan Tool
The “Scan Tool” function read data and perform diagnostic function for OBD II protocol
4.6 Log In/Upload Data/Download
In “Main” page, click the “Log in” button to sign in (if you have registered before) or sign
up (if have not registered before), as shown in figure 33 and figure 34
By this function you can send/upload diagnostic data to the server or receive/download
new engine control software code for the ECU (need to get the access authorization on the
server)
To Next Page
Loading...
