P REPARATION FOR REMOVAL AND DISMANTLING
Remove all the dirt, grime, dust and other foreign material
before removing and dismantling.
Use properly cleaned tools and equipment.
See “ SPECIAL TOOLS ”.
On dismantling parts, always keep related items together.
This includes gears, cylinders, pistons and other parts sub-
mitted to natural wear together. Related parts must always
be reassembled or replaced together.
While dismantling the motorcycle, clean all the parts and lay
them out on trays in the order dismantled. This speeds up re-
assembly and ensures the correct fitting of all the parts.
Keep all parts away from any contact with fire.
6
GENERAL INFORMATION
WORKSHOP MANUAL
To Next Page
Loading...
