um DSR EX 125 - Inspecting the Oil Passages (Right Hand Side Casing Cover); Bearings and Retaining Rings Check; Locking Rings and Washers Check

I NSPECTING THE OIL PASSAGES
( RIGHT HAND SIDE CASING COVER)
1. Inspect:
- Oil passage
Obstructions => Blow through with compressed air.
C ASING
1. Wash the casings well with petrol.
2. Clean the seal-bearing surfaces and the casing contact
surfaces well.
3. Inspect:
- Casings
Cracks/damage => Renew.
- Oil passages
Obstructions => Blow through the passages with com-
pressed air.
B EARINGS AND RETAINING RINGS
1. Inspect:
- Bearings
Clean and lubricate, then turn the inner ring by hand.
Roughness => Renew
2. Inspect:
- Retaining rings.
Damage/wear => Renew.
L OCKING RINGS AND WASHERS
1. Inspect:
- Circlips
- Washers
Damage/loose/distorted => Renew.
L
58
INSPECTION AND REPAIR
WORKSHOP MANUAL