UNI-T UTD2102CEX-II - Sampling System Setting; Sampling Rate

Digital Filter
Chapter 6 - Sampling System Setting
Sampling is taking analog input and converts into a discrete points using
analog to digital converter (ADC). Press the ACQUIRE key to enter the
sampling menu.
Sampling menu
In average sampling mode，use Multipurpose
knob to set average time, number can be in the
range of 2n, where n is 1~13 integer
Automatic storage depth
2~512
Auto
OFF
ON
Descriptions
Sampling in a normal manner
Sampling with peak detection
Sampling with a high resolution
Sampling in an average manner
Options
Normal
Peak
High
Resolution
Average
Functions
Sampling
Mode
Average
Storage
Depth
Fast
sampling
6.1 Sampling Rate
(1) Sampling and Sampling Rate
When the analog signal is sampled, the sample is then converted into digital
data. The digital data is collected as the waveform record , and the recorded
data is then stored in the memory.
Analog Singal Sampling Points
UTD2000CEX-II User Manual