Safety Terms and Symbols
The following terms may appear in this manual:
Warning: The conditions and behaviors may endanger life.
Note: The conditions and behaviors may cause damage to the product
and other properties.
The following terms may appear on the product:
Danger: Performing this operation may cause immediate damage to the
operator.
Warning: This operation may cause potential damage to the operator.
Note: This operation may cause damage to the product and devices
connected to the product.
The following symbols may appear on the product:
Perface
This manual describes the operation of the UTD2000CEX-II series digital
oscilloscope . The manual includes the following sections:
Chapter 1 Introduction Guide
Chapter 2 Vertical channel setting
Chapter 3 Trigger system setting
Chapter 4 Horizontal system setting
Chapter 5 Mathematical operation
Chapter 6 Sampling system setting
Chapter 7 Display system setting
Chapter 8 Automatic measurement
Chapter 9 Cursor measurement
Chapter 10 Storage and callback
Chapter 11 Auxiliary function setting
Chapter 12 Other function keys
Chapter 13 System prompt and troubleshooting
Chapter 14 Technical specification
Chapter 15 Appendix
UTD2000CEX-II User Manual
To Next Page
Loading...
