11.1 System configuration
System configuration menu (1)
Descriptions
press the Select key to start
the self calibration
prompting the system name and version
press the Select key to clean up
Enter time setup page
Enter next page
Functions
Self calibration
System information
Clean information
Time setup
Next page
Options
System configuration menu (2)
Descriptions
pop-up default dialog box,
press the select key to start
Use Multipurpose to adjust the
screen contrast ratio, Max 100
Select whether to open the screen
saver, if opened, the screen will be
closed when the set - time arrives,
Press any key to restore.
Return UTILITY root directory
Functions
Factory settings
Contrast ratio
Screen protection
Return
Close
1 minute
5 minutes
10 minutes
30 Minutes
Options
Time menu setting
Descriptions
Control display
Selected via the F2 button, use
Multipurpose key to adjust
Selected via the F3 button, use
Multipurpose key to adjust
Selected via the F4 button, use
Multipurpose key to adjust
Make the modification to be valid
Functions
Time display
Minute &hour
Date&month
Year
Confirm
Options
On/Off
11.2 interface configuration
Descriptions
Control the display /hide
time of the side bar menu
Use Multipurpose key to
modify the display brightness
of the grid, the highest 32
Options
Simplified Chinese
English Traditional
Chinese
Manual 2s,
5s, 10s, 20s
Functions
Language
Menu display
Grid brightness
Return
UTD2000CEX-II User Manual
To Next Page
Loading...
