UNI-T UTD2102CEX-II - Recorder; Waveform Generator; System Upgrade

11.6 Recorder
Recorder operation menu
Descriptions
Pay back the record datas
Stop recording
Start to record
Enter record setting menu
Functions
Run
Stop
Record
Setup
Options
Recorder setting menu
Descriptions
When Playback, Use Multipurpose
key to control step size
Use Multipurpose key to adjust
the time , Max up to 1000s
the playback mode Piont or Frame
Options
Point by point
frame by frame
On /Off
Functions
Coarse / fine
adjustment
Interval
Playback mode
Cycle playback
11.7 Waveform generator
Waveform generator menu (1)
Descriptions
Turn on /off AWG output
To select the base waveform
Enter the parameter menu setting
Options
On/Off
sine wave
square wave
Sawtooth wave
Triangular wave
Pulse wave
Functions
Output
waveform
Setup
Waveform generator menu (2)
Descriptions
Use Multipurpose key to adjust signal frequency
Use Multipurpose key to adjust signal amplitude
Use Multipurpose key to adjust signal Shifting
Modify Pulse width for pulse signal,
Modify duty cycle for square wave signal,
Modify symmetry for sawtooth wave
Functions
frequency
amplitude
Shifting
Pulse width
/duty cycle/
symmetry
Options
11.8 System Upgrade
This series oscilloscope can use USB disk to upgrade the software to give
users a more convenient and flexible experience. To use this feature, please
follow the following steps:
① Press UTILITY to enter the auxiliary function menu, press F1 to view
system information, access the machine's model number, software, and
hardware version information.
UTD2000CEX-II User Manual