Unifiller Systems Inc. Page 39 of 48 Manual Part No.: MINI
DOPOSITOR
TROUBLESHOOTING GUIDE
No Power or power light fails to illuminate-
Check main power supply breaker
Check Power supply to machine
Check cord going into the panel.
Sluggish cutter speed
Check air pressure and increase if required
Check air connections for leaks.
Check air connection on safety guard
Variable Dough Flow
Check dough supply level-add more dough to hopper if required
Reverse auger momentarily, then allow to run
Erratic movement of cutter
Check to ensure there is no water in the airlines or bowl of separator.
To Next Page
Loading...
Need help?
General
