P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation 13
First steps
Wall mounting
For outdoor use the device can also be mounted in an outdoor case. Detailed information on
installing the outdoor case can be found in the "HiPath Cordless IP – Service Documentation".
Fix the device to the wall with two screws:
Drill holes with the vertical spacing of 110
mm.
Affix wall plugs and secure the screws. Let
the screws protrude by approx. four mm.
Hang the device on the screws.
110
To Next Page
Loading...