P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation 17
Configuring the system
The web configurator
4 Configuring the system
System settings are made via the web configurator of the OpenScape Cordless IP V2 ( p. 17) and cannot be
changed using the handsets.
This applies in particular for:
• Registering and de-registering the handset to the telephone system, handset name.
• All settings for the VoIP account used by a handset for calls.
• Configuration of online directories.
Handset-specific settings are preset on your handset. You can change these settings.
This applies, for example, for Display settings, such as language, colour, backlight etc.
• Settings relating to ringtones, volume, speaker profiles etc.
Information about this can be found in the user guide for the relevant handset.
4.1 The web configurator
Use the web configurator to set up your OpenScape Cordless IP V2 and configure your DECT network.
• Set up the DECT network, register and synchronise the base stations.
• Make basic settings for the VoIP connections and register and configure the handsets you wish to use in the
DECT network.
• Save data required to access specific services on the Internet. These services include access to online
directories, as well as synchronising the date/time with a time server.
• Save your DECT network's configuration data as files on your PC and reload these in the event of an error.
Upload new firmware, if available, and plan firmware updates at a specific date.
4.1.1 Starting
Launch the web browser on your PC/tablet.
Enter the current IP address for the Integrator/DECT manager in the address field of the web browser (for exam-
ple: http://192.168.2.10).
At least one OpenScape Cordless IP V2 device is installed as Integrator/DECT manager ( p. 12).
A standard web browser is installed on the PC/tablet.
The device housing the Integrator/DECT manager and the PC/tablet are directly connected to one
another in a local network. The settings of any existing firewall installed on your PC allow the PC/
tablet and Integrator/DECT manager to communicate with each other.
While you are connected to the web configurator, it is blocked to other users. Simultaneous access is
not possible.
To Next Page
Loading...
Need help?
General