P31003C1020M1000276A9, 01/2018
90 OpenScape Cordless IP V2, Administrator Documentation
Diagnostics and troubleshooting
System log and SNMP manager
The page contains the following information on incidents concerning DECT manager operation.
12.3.1 Actions
Downloading detailed information to a file
To get detailed information about the circumstances causing the error, you can download the incident information
to a file. If required, you can pass it to the responsible service personnel.
Mark the check box next to one or more incidents you want to download or next to Timestamp, if you want to
download all incidents.
Click on Download and select the desired file location for the log files in the file system . . . for each selected
incident a log file is created. All log files are taken into a tar file.
Deleting entries
Mark the check box next to one or more incidents you want to delete or next to Timestamp, if you want to
delete all incidents.
Click on Delete.
Refreshing the list
Click on Refresh, to update the information in the table.
Browsing through the list
If there is not enough space to display all entries you can browse through the whole table. The number of pages
is shown below the list. The current page is highlighted.
Click on Previous or Next to scroll through the list page by page.
Click on a specific page number, to go to the desired page directly.
12.4 System log and SNMP manager
The system report (SysLog) gathers information about selected processes performed by the DECT manager and
base stations during operation and sends this to the configured SysLog server.
Settings System System log
Timestamp Date and time of the incident
DECT manager DECT manager affected
Incident Type e.g. Crash, Reboot, Reset
Info Detailed information, e.g., the component producing the problem
To Next Page
Loading...
Need help?
General