P31003C1020M1000276A9, 01/2018
50 OpenScape Cordless IP V2, Administrator Documentation
Mobile devices
Registering/de-registering handsets
8.1.1 Actions
Adding a handset to the list
Click on Add . . . the mobile devices data page is opened ( p. 50).
Copying handset data for another configuration
Select the check box next to the handset whose settings you want to copy. Click on Copy . . the mobile
devices data page is opened ( p. 50). The settings of the selected mobile device except personal data are
taken over for the new handset configuration.
Deleting a handset from the list
Select the check box next to the handset you want to delete. Multiple choice is possible. Click on Delete
Confirm with Yes . . . all selected handsets are deleted.
Editing the data of a handset
Click on next to the handset you want to edit . . the mobile devices data page is opened ( p. 50).
8.2 Registering/de-registering handsets
The page allows you to register a handset with the DECT multicell network or to prepare the registration of numer-
ous handsets via the Registration Center. You can assign a VoIP account, enable online directories, and make
further settings for the handsets.
8.2.1 Registering handsets
Enter an IPUI, if you want to restrict the registration to a specific handset.
Enter an authentication code manually or generate it via the Generate random PIN button.
Enter all configuration data for the handset.
Click on Register now.
The handset with the matching IPUI is now allowed to register. If no IPUI is defined all handsets within range can
register.
On the handset
Start the registration procedure as described in the appropriate documentation. When prompted, enter the
PIN that has been entered or generated.
Registering a set of handsets
You can register a set of handsets without restarting the registration mode. Prepare registration for new mobile
devices as follows:
Enter the actual IPUI and maybe an individual PIN
or
FW Current firmware version of the handset.
The system stays in registration mode as long as it is defined via the Registration duration
parameter on the Registration Center page ( p. 57). Default: 3 min.
To Next Page
Loading...
Need help?
General