Unify OpenScape Cordless IP V2 User Manual

P31003C1020M1000276A9, 01/2018
98 OpenScape Cordless IP V2, Administrator Documentation
Using handset connected to a BSIP2 base
Using the network mailbox
The directories are displayed with the names specified in the web configurator.
Example for handling a corporate directory on the handset ( p. 105).
13.6 Using the network mailbox
The network mailbox accepts incoming calls made via the corresponding line (corresponding VoIP phone num-
ber).
In order to record calls, a network mailbox must be set up for the VoIP connection assigned to the handset. This
is done during handset configuration in the Network mailbox configuration section ( p. 55).
Playing back messages
 Press and hold (if key 1 has been assigned to the network mailbox)
or
 Press the Message key . . . use to select the network mailbox OK
or
¤ . . . use to select Answer Machine OK Play Messages OK
Listen to announcement out loud: Press the handsfree key
If handsets are connected to a OpenScape Cordless IP V2, it is not possible to transfer entries from the
local directory to another handset.

Unify OpenScape Cordless IP V2 Specifications

General

Brand	Unify
Model	OpenScape Cordless IP V2
Category	Accessories
Language	English