P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation 25
Network administration
Local network setting – VLAN
5.2 Local network setting – VLAN
Details in this page are only required if you connect your phone system to a local network that is divided into virtual
subnetworks (VLAN – Virtual Local Area Network). In a tagged VLAN, data packets are assigned to the individual
subnetworks via tags (markings) that consist of a VLAN identifier and the VLAN priority, amongst others.
Settings Network LAN
You will need to save the VLAN identifier and VLAN priority on the phone system configuration. Your VLAN pro-
vider will supply you with this data.
VLAN tagging
Select the check box next to VLAN tagging, if you want the phone system to use VLAN tagging.
VLAN identifier
Enter the VLAN identifier that uniquely identifies the subnetwork. Value range: 0–4094.
VLAN priority
The VLAN priority allows voice data transport to take priority, for example.
From the option menu select the priority for the phone system data.
Value range: 0–7 (0 = lowest, 7 = highest priority)
Ensure that the details in VLAN identifier or VLAN priority are set correctly. Incorrect settings can
cause problems when connecting the DECT manger for configuration purposes. Internal connec-
tions between DECT manager and base stations are not tagged and therefore phone functions are
not concerned.
If required, you must carry out a hardware reset via power procedure ( p. 15). This means that all
settings are lost.
To Next Page
Loading...
Need help?
General