P31003C1020M1000276A9, 01/2018
52 OpenScape Cordless IP V2, Administrator Documentation
Mobile devices
Registering/de-registering handsets
8.2.2 De-registering handsets
In the handset list click on next to the handset you want to de-register. The status is Registered.
From the RegStatus option menu select To deregister. Click on Set . . . the handset is de-registered.
In the handset list an empty entry in To register status is shown. As long it is not deleted, you can re-register the
handset (or any handset if no IPUI is given) via the Mobile devices the edit page or the Registration Center.
8.2.3 Settings for the handset
When registering a handset you can define important settings and assign functions at the same time.
Personal provider data
Configure the VoIP account for the handset. If the handset is successfully registered, will be shown in the SIP
column in the Mobile devices list.
VoIP provider
Choose a configured VoIP PBX/provider from the option menu.
The connection must be configured on the Provider or PBX profiles page ( p. 40).
Enter the access data for the VoIP account in the relevant fields. These fields may vary depending on the PBX/
provider profile.
Authentication name
Specify the SIP authentication (HTTP digest) name. The Authentication name acts as access ID when regis-
tering with the SIP proxy/registrar server. It is usually identical to the phone number for the VoIP account. Value:
max. 74 characters
DECT de-registration successful: The handset is deleted from the Mobile devices list.
DECT de-registration not successful: The handset stays in the Mobile devices list with status To deregister.
The VoIP/PBX account must be set-up beforehand ( p. 40).
To Next Page
Loading...
Need help?
General