P31003C1020M1000276A9, 01/2018
96 OpenScape Cordless IP V2, Administrator Documentation
Using handset connected to a BSIP2 base
Conversation with three participants
13.3.2 Call swapping
Switching between two calls. The other call is placed on hold.
During an external call, dial the number of a second participant (consultation call) or accept a waiting caller . . .
the display shows the numbers and/or names of both call participants
Use the control key to switch back and forth between participants
Ending a currently active call
Options End active call OK . . . the connection to the other caller is reactivated
or
Press the End call key . . . a recall to the first participant is initiated
13.3.3 Conference
Speaking to both participants at the same time.
During an external call, dial the number of a second participant (consultation call) or accept a waiting caller . . .
then
Initiate conference call:
Conf.
. . . all callers can hear one another and hold a conversation with one another
Return to call swapping:
End Conf.
. . . You will be reconnected to the participant with whom the conference call was initiated
End call with both participants:
Press the End call key
Each of the participants can end their participation in the conference call by pressing the End call key or hang-
ing up.
13.3.4 Call transfer
Connecting an external call with a second external participant.
Use the display key Ext. Call to establish an external consultation call . . . use to enter the number of the
second participant . . . the active call is placed on hold . . . the second participant is called press the End call
key (during a conversation or before the second participant has answered) . . . the call is transferred
Call transfer options must be set correctly for the PBX/provider ( p. 44).
To Next Page
Loading...
Need help?
General