0:30 to 17:00 hr (See fig. g)
RUN TIME is displayed as long as slab is up to temperature
and the control is in the melting mode.
INF (See fig. h)
Displayed if an infinite run time is selected and the control is
in the melting mode.
WWSD (See fig. i)
Displayed when control is in a Warm Weather Shut Down
CWCO (See fig. j)
Displayed when control is in a Cold Weather Cut Out
74
CONTROL FUNCTION
OVERVIEW
CONTROL FUNCTION OVERVIEW - CONTROL FUNCTION OVERVIEW - Section E - Snow Melting
To Next Page
Loading...
