UPPAbaby Rove - Rear-Facing and Forward-Facing Installation

Features Overview – Rear-Facing and Forward-Facing Installation
1 2 3
31
This Child Restraint features a BLUE BELT PATH with a lock-o door and clear indicators to ensure a secure and proper
install for REAR-FACING INSTALLATION. It also has a RED BELT PATH with a lock-o door and clear indicators to ensure a
secure and proper install for FORWARD-FACING INSTALLATION.
Both Belt Paths feature a SMARTSecure visual window that turns from RED to GREEN
when correct installation has been achieved.
Note: The SMARTSecure RED to GREEN indicator is a guide for confirming a tight installation. As all vehicle makes and
models are dierent, it is possible that a tight installation has been achieved even though the window is not fully green.
Always assess the install by checking at the belt path that the seat does not move more
than 1" (2.5 cm) side to side or front to back on the vehicle seat.
To Access Either Belt Path
1 Loosen harness (page 22).
2 Raise the Active Support Headrest to highest position by
pushing down and pulling up on handle (page 26).
3 Unfasten fabric seat pad as needed for better access.