UPPAbaby Rove - Vehicle Seat Recline

1
44
If recline position cannot be achieved, this is
an easy issue to resolve by following the steps
below:
Note: Ensure you are parked on level ground
before adjusting recline.
1 Set up your Rove
Note: Place a folded hand towel under the
Rove against the seat bight (crease of seat). You
may need to adjust number of folds to achieve
the proper recline.
2 Once the bead is in the correct BLUE area for
REAR-FACING INSTALLATION, proceed with
installation. Follow Safety Check (page 57) to
confirm proper steps.
Rear-Facing Installation – Vehicle Seat Recline
Some cars may have a dierent type of seat
that is more angled or sloped. In this instance,
it may be more dicult to achieve the proper
recline angle.