2
1
70
1 Route the webbing either through the vehicle
headrest posts or, if an integrated headrest exists,
over the top of the headrest.
2 Hook the Multi-Directional Tether to an approved
vehicle Tether (LATCH) location. Please refer to your
vehicle owner’s manual.
Review Safety Check on page 73.
All steps must be achieved before moving forward.
ATTENTION: IT IS STRONGLY RECOMMENDED to utilize the multi-directional tether for FORWARD-FACING installation if
vehicle is equipped with a tether anchor point and vehicle requirements are met. The tether will improve the stability of your
child restraint and reduce the risk of injury. See your vehicle owner’s manual for approved anchor locations.
Forward-Facing Installation – Forward-Facing Tether Use
To Next Page
Loading...
