7
54
6
61
Adjuster by pushing down and
pulling up on handle as shown then
pull upward to allow access to the
RED FORWARD-FACING belt path.
6 Unfasten the fabric panel and pull
forward.
7 Remove Multi-Directional Tether
from storage, lengthen webbing and
place on front side of the seat prior
to installation (page 70).
To complete FORWARD-FACING
installation, please refer to:
Lap/shoulder Belt page 62
Lap Belt Only page 64
Latch page 66
Forward-Facing Installation – Setup
To Next Page
Loading...
