Upright SL26 Series User Manual

Inspection and Maintenance Schedule
2-15
2.10I NSPECTION AND M AINTENANCE S CHEDULE
The Complete Inspection consists of periodic visual and operational checks, along with periodic
minor adjustments that assure proper performance. Daily inspection will prevent abnormal wear
and prolong the life of all systems. The inspection and maintenance schedule should be performed
at the specified intervals. Inspection and maintenance shall be performed by personnel who are
trained and familiar with mechanical and electrical procedures.
WARNING
!
!
Before performing preventative maintenance, familiarize yourself with the operation of the
machine.
Always ensure there is sufficient space around the machine for safe working conditions.
Always block the elevating assembly whenever it is necessary to perform maintenance while
the platform is elevated.
The daily preventative maintenance checklist has been designed for machine service and
maintenance. Please photocopy this page and use the checklist when inspecting the machine.
2.11D AILY P REVENTATIVE M AINTENANCE C HECKLIST
M AINTENANCE T ABLE K EY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
P REVENTATIVE M AINTENANCE R EPORT
Date:_______________________________________
Owner: _____________________________________
Model No:___________________________________
Serial No: ___________________________________
Serviced by:....................................................................
___________________________________________
COMPONENT INSPECTION OR SERVICES Y N R
Battery
Check electrolyte level.
Check battery cable condition.
Chassis
Check hoses for pinch or rubbing points.
Check welds for cracks.
Control Cable Check the exterior of the cable for pinching, binding or wear.
Controller Check switch operation.
Drive Motors Check for operation and leaks.
Elevating Assembly Inspect for structural cracks.
Emergency Lowering System Operate the emergency lowering valve and check for serviceability.
Entire Unit Check for and repair collision damage.
Hydraulic Fluid Check fluid level.
Hydraulic Pump Check for hose fitting leaks.
Hydraulic System Check for leaks.
Labels Check for peeling, missing, or unreadable labels & replace.
Platform Deck and Rails Check welds for cracks.
Platform Deck and Rails Check condition of deck.
Tyres and Wheels Check for damage.

Upright SL26 Series Specifications

General

Brand	Upright
Model	SL26 Series
Category	Lifting Systems
Language	English