Utax 256i User Manual

6-48
Sending > Scanning using TWAIN
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1
Display the window.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application software and display the TWAIN dialog box.
2
Configure the function.
Select scanning settings in the TWAIN dialog box that opens.
The settings that appear in the TWAIN dialog box are as follows.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
Item Detail
Basic Original Size This setting sets the size of the scan area.
Feed Method This setting specifies the feed method of the original.
Select the feed method from the list.
Original Orientation This setting specifies the orientation of the original.
Sending Size This setting specifies the image size.

Utax 256i Specifications

General

Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Max Paper Size	A4
Duplex Printing	Yes
Memory	256 MB
Functions	Print, Copy, Scan
Print Speed	25 ppm
Copy Speed	25 ppm b/w
Connectivity	USB, Ethernet
First Page Out Time	6.4 seconds
Print Languages	PCL6, PostScript 3
Display	LCD