Utax 256i User Manual

3-7
Common Operations > Loading Originals
Loading Originals
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
Open the document processor, and place the original.
NOTE
Before opening the document processor, be sure that there are no originals left on the original table or on the original
eject table. Originals left on the original table or on the original eject table may fall off when the document processor is
opened.
Shadows may be produced around the edges and in the middle of open-faced originals.
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
IMPORTANT
Do not push the document processor forcefully when you close it. Excessive
pressure may crack the platen glass.
When placing books or magazines on the machine, do so with the document
processor in the open position.
Ali
gn
it
fl
us
h
aga
i
ns
t
th
e
original size indicator plates
with the back left corner as
the reference point.
Put the scanning
side facedown.

Utax 256i Specifications

General

Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Max Paper Size	A4
Duplex Printing	Yes
Memory	256 MB
Functions	Print, Copy, Scan
Print Speed	25 ppm
Copy Speed	25 ppm b/w
Connectivity	USB, Ethernet
First Page Out Time	6.4 seconds
Print Languages	PCL6, PostScript 3
Display	LCD