Why Utax Fax Machine cannot perform memory forwarding?
If your Utax Fax Machine cannot perform memory forwarding, ensure that memory forwarding is set to [On]. Check the memory forwarding setting.
Why Utax CD 1028 cannot perform sub address transmission?
If you cannot perform sub address transmission on your Utax Fax Machine, it could be due to the following reasons: * Ensure that the recipient fax machine is equipped with a sub address transmission feature, as it is required for this function to work. * Verify that the entered sub address or sub address password is identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. Note: This machine does not use a sub address password for reception. * Check with the recipient to ensure there is free space available in the memory of their fax machine.
Why Utax CD 1028 cannot perform memory reception?
If your Utax Fax Machine cannot perform memory reception, it is likely due to insufficient memory. Ensure there is free space available in the memory. You can receive after the memory has free space, or create free space in the memory.
Why Utax CD 1028 Fax Machine cannot receive documents?
If your Utax Fax Machine cannot receive documents, it could be due to the following reasons: * Check if the modular cord is connected correctly, and connect it properly if it isn't. * If a 'Communication error' is displayed, identify and fix the cause of the error, then ask the sender to retry. * Verify whether RX (reception) restriction is activated. If it is, cancel the RX restriction to enable receiving.
Why can't I perform broadcast transmission on my Utax CD 1028?
If you are unable to perform broadcast transmission on your Utax Fax Machine, it may be due to insufficient memory. Ensure there is free space available in the memory. You can either send after the memory has free space or create free space in the memory.
What to do if Utax CD 1028 displays 'Scheduled sending jobs exceeded'?
If your Utax Fax Machine displays 'Scheduled sending jobs exceeded', it means the number of jobs has exceeded the limit set for delayed transmission. To resolve this: 1. Press the OK key to cancel the current job. 2. Wait until the delayed transmission is executed, or cancel a delayed transmission. 3. Perform the job again.
What to do if Utax Fax Machine displays 'Job Accounting restriction exceeded. Cannot scan.'?
If your Utax Fax Machine displays 'Job Accounting restriction exceeded. Cannot scan.', it indicates that fax transmission is prohibited by Job Accounting. To resolve this: 1. Press the OK key to cancel the current job. 2. Check the settings for Job Accounting to ensure fax transmission is allowed.
What to do if Utax Fax Machine displays 'Job Accounting restriction exceeded'?
If your Utax Fax Machine displays 'Job Accounting restriction exceeded', it means the limit for paper use has been exceeded. To resolve this: 1. Press the OK key to cancel the current job. 2. Reset the limit for paper use in the Job Accounting settings. 3. Try performing the job again after resetting the limit.
What to do if Utax CD 1028 Fax Machine shows 'Sub address/Polling limit exceeded'?
If your Utax Fax Machine displays 'Sub address/Polling limit exceeded', it means the sub address box or polling box capacity is full. To resolve this: 1. Press the OK key to cancel the current job. 2. Print or delete the data in the sub address box to free up space. 3. Try performing the job again.
Why my Utax CD 1028 Fax Machine cannot send documents?
If your Utax Fax Machine cannot send documents, it could be due to several reasons: * Check if the modular cord is connected correctly and connect it properly if it isn't. * If a 'Communication error' is displayed, identify and fix the cause of the error, then try sending the document again. * Verify whether TX (transmission) restriction is activated. If it is, cancel the TX restriction to enable sending.
General| Brand | Utax |
|---|---|
| Model | CD 1028 |
| Category | Fax Machine |
| Language | English |
To Next Page
