Utax CD 1028 - User Manual

Questions and Answers

T
Theresa LevyAug 31, 2025
Why Utax CD 1028 cannot perform sub address transmission?
- K
  Katherine GordonAug 31, 2025
  If you cannot perform sub address transmission on your Utax Fax Machine, it could be due to the following reasons: * Ensure that the recipient fax machine is equipped with a sub address transmission feature, as it is required for this function to work. * Verify that the entered sub address or sub address password is identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. Note: This machine does not use a sub address password for reception. * Check with the recipient to ensure there is free space available in the memory of their fax machine.
J
Jason HuynhAug 25, 2025
What to do if my Utax CD 1028 shows 'Machine failure. Call service'?
- G
  gjohnsonAug 25, 2025
  If your Utax Fax Machine displays 'Machine failure. Call service', try these steps: 1. Turn the main power switch off and then on again. 2. If that doesn't work, unplug the power cord from the outlet, wait a few seconds, and then plug it back in. If the error message persists after these steps, make sure to note the error code, turn off the main power switch, unplug the power cord, and then contact your service representative for further assistance.
L
Lisa ThompsonSep 1, 2025
Why Utax Fax Machine cannot perform memory forwarding using a sub address?
- J
  johnsonvirginiaSep 1, 2025
  If your Utax Fax Machine cannot perform memory forwarding using a sub address, it could be due to the following reasons: * Ensure that the recipient fax machine is equipped with a sub address transmission feature, as it is required for this function to work. * Verify that the entered sub address is identical to the sub address registered in the recipient fax machine. If your entry is correct, check with the recipient. Note: This machine does not use a sub address password for reception.
M
Mia JonesSep 2, 2025
Why Utax Fax Machine cannot store memory forwarding data in a Sub Address Box?
- D
  Deborah WrightSep 2, 2025
  If your Utax Fax Machine cannot store memory forwarding data in a Sub Address Box, it could be due to the following reasons: * Ensure that the Sub Address Box is specified correctly. Check the memory forwarding setting. * Ensure that there is free space available in the memory. Receive after the memory has free space, or create free space in the memory.
J
John ReeseSep 3, 2025
Why Utax CD 1028 Fax Machine cannot perform encrypted communication?
- K
  kurtpattersonSep 3, 2025
  If your Utax Fax Machine cannot perform encrypted communication, double-check the registrations both at the sender and recipient to ensure they are correct.
T
theresadavisSep 3, 2025
Why Utax CD 1028 cannot output from a Sub Address Box?
- J
  Jason MartinSep 3, 2025
  If your Utax Fax Machine cannot output from a Sub Address Box, ensure that you enter the correct box password.
G
griffithjillSep 4, 2025
Why Utax CD 1028 Fax Machine cannot use polling reception?
- G
  gaillopezSep 4, 2025
  If your Utax Fax Machine cannot use polling reception, check with the recipient to ensure that polling transmission is being used correctly on the sending machine.
M
Melissa MartinSep 5, 2025
What to do if Utax CD 1028 Fax Machine says 'The phone receiver is off the hook'?
- E
  estessamanthaSep 5, 2025
  If your Utax Fax Machine displays 'The phone receiver is off the hook', and you have a commercially available phone connected to the machine, ensure that the handset is hung up.
Y
yhamiltonSep 6, 2025
Why Utax CD 1028 cannot use the remote switching function?
- T
  Taylor HornSep 6, 2025
  If your Utax Fax Machine cannot use the remote switching function, it could be due to the following reasons: * If a pulse line is used, some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set for guidance. * Check the registration to ensure the remote switching number is correct. The default number is 55.
D
Douglas SmithSep 6, 2025
Why Utax CD 1028 cannot use sub address relay broadcast communication?
- P
  Patrick BrownSep 6, 2025
  If your Utax Fax Machine cannot use sub address relay broadcast communication, free up some space in memory and then send, or simply make some free space in memory.