Default Setting (System Menu)
OPERATION GUIDE 8-43
8
Print Density
Adjust print density. Adjustment can be made in 5 levels.
Use the procedure below to adjust the print density.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Change] of Print Density.
3 Press [1] - [5] (Lighter-Darker) to adjust density.
4 Press [OK].
Drum Refresh
Refresh the drum when image blur or white spots appear on images in copies.
NOTE: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
To use [Drum Refresh], load Ledger or A3 size paper into the Multi Purpose tray.
Use the procedure below to refresh the drum.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance].
3 Press [Next] of Drum Refresh.
4 Press [Execute] to perform Drum Refresh.
5 After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.
To Next Page
Loading...
