Default Setting (System Menu)
8-68 OPERATION GUIDE
5 Press [OK].
6 After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-14 about the procedures.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On. Use the procedure below.
1 Press the System Menu key.
2 Press [System], [Next] of Network and then [Change] of WSD Scan.
3 Press [On] or [Off].
4 Press [OK].
5 After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On. Use the procedure below.
1 Press the System Menu key.
2 Press [System], [Next] of Network and then [Change] of WSD Print.
3 Press [On] or [Off].
4 Press [OK].
5 After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
To Next Page
Loading...
