2-15
Installing and Setting up the Machine > Default Settings of the Machine
7 Use the numeric keys or press the [ā²] or [ā¼] key to set the subnet mask.
You can set any value between 000 and 255. The entry method is the same method as the IP
address.
8 Press the [OK] key.
9 Press the [ā²] or [ā¼] key to select [Default Gateway], and press the [OK] key.
10
Use the numeric keys or press the [ā²] or [ā¼] key to set the default gateway.
You can set any value between 000 and 255. The entry method is the same method as the IP
address.
11
Press the [OK] key.
The network can be configured from the computer by using Embedded Web Server RX.
Refer to the Embedded Web Server RX User Guide.
To Next Page
Loading...
Need help?
General
