2PS/2PT
1-3-1
1-3 Service Mode
1-3-1 Service mode
The machine is equipped with a maintenance function which can be used to maintain and service the
machine.
(1) Executing a service mode
Press the Menu key.
Select [Adjust/Maintenance] using
the cursor up/down keys
and press the cursor right key.
The selected service mode is run.
Press the stop key.
Select [Service] using the cursor up/down
keys and press the cursor right key.
Start
End
The Mode Selection Menu appears.
The Adjust/Maintenance menu appears.
The Service Setting menu appears.
To Next Page
Loading...
